Shaping Machine of maruti is all geared with Automatic Lubrication. The model of Shaping Machine used is given below:
Maruti Brand 610 shaping machine is made of graded casting components,gear duly nitrated hardened, excellent raw material used either carbon steel and EN 8 Screw and shafting, preciously manufactured under the strict instruction of qualified and experienced Technical staff with modern equipments- Mechanical Test Report as per IS:2310-1963 Stranded.
This machine is useful for the machining of horizontal, vertical and inclined surfaces.
It is also ideal for cutting rectangular slots, channels and flutes as well as useful for operation in piece and small lot production.
| CAPACITY | INCHES | MM |
| Length of ram stroke | 24" | 610 |
| Length of ram | 49" | 1245 |
| Length & width of ram bearing | 36" X 11" | 915 X 279 |
| Maximum & minimum distance from table to ram | 18" X 31/2" | 457 X 89 |
| TABLE: | ||
| Working surface of table | 19" X 13" | 483 X 330 |
| Maximum table travel horizontal. | 24" | 610 |
| Maximum table travel vertical | 16" | 406 |
| Angular movement of table on either sides | -60.L 60.R | |
| TOOL HEAD: | ||
| Maximum size of tool shank accomodated | 2" X 13/16" | 51 X 21 |
| Maximum vertical travel of tool side. | 6" | 152 |
| Maximum swivel of tool head. | -60.L 60.R | |
| LENGTH OF MAIN SIDE:BASE: | 36" | 915 |
| Length & width of base | 64" X 24" | 1630 X 610 |
| SPEED & FEEDS : | ||
| Dia. of clutch Pulley. | 121/2" | 318 |
| Cone pulley belt. | 3 Nos. | |
| Range of ram speed. | 4 | |
| Stroke per minute | 12,24,48,72 | |
| Dia. of motor pulley. | 31/2" | 89 |
| Range of table feed per stroke of ram. | 0.009 | 0.229 |
| DRIVE & ELECTRICAL EQUIPMENTS: | ||
| 3 phase electric motor main drive motor. | 2 H.P. | |
| Speed R.P.M. | 1440 RPM | |
| V-Belt section | B-55 | |
| Main switch starter(Reverse forward) | 5 AMP | |
| OVERALL DIMENSION & WEIGHT: | ||
| Length | 78" | 1981 |
| Width | 42" | 1067 |
| Height | 63" | 1600 |
| Weight (Approx) | 1750 Kgs. | |